How to Manually Move a Ford F150 Power Seat?

This post may contain affiliate links. If you click one, I may earn a commission at no cost to you. As an Amazon Associate, I earn from qualifying purchases.

The power seats in Ford F150 trucks allow drivers to adjust the seat position with the touch of a button. This convenient feature enables you to find the perfect driving position quickly and easily. However, power seats can sometimes malfunction and get stuck in one position. When this happens, you may need to move the seat manually.

What You’ll Need to Move a Ford F150 Power Seat Manually

To move a Ford F150 power seat manually, you’ll need a few basic tools:

  • Pliers or wrench to disconnect the power seat cables
  • Phillips screwdriver to remove seat fasteners
  • Spring hook tool to detach the seat springs

You’ll also need enough space around the seat to access the components underneath. Moving the truck outdoors or into a garage will make the job much easier.

Step-by-Step Instructions for Manually Moving a Ford F150 Power Seat

Follow these steps to manually move your Ford F150 power seat forward or backward when the power controls fail:

Remove the Seat from the Truck

The easiest way to move the seat is to take it out of the truck completely.

  1. Unbolt the seat from the floor using a wrench or socket set. There will be four bolts, two in the front and two in the rear.
  2. Disconnect the wiring harness underneath the seat. The harness has a plug that detaches from the control module.
  3. Use a spring hook tool to detach the springs holding the seat bottom in place.
  4. Lift the seat out of the truck and place it on a flat surface. The seat can now be moved manually.

Cut the Spring Mesh Holding the Seat In Place

If you want to avoid fully removing the seat, an alternative is to cut through the spring mesh:

  1. Locate the flexible mesh of springs under the driver’s seat.
  2. Use wire cutters to snip through the mesh on both sides, freeing the seat from the springs.
  3. This will allow you to slide the seat backward and forward on its rails.

Access the Seat Control Shafts

You can manually move the seat by turning the control shafts with pliers:

  1. Reach under the seat and locate the two control shafts sticking out of the power seat motor.
  2. One shaft moves the seat up and down, the other controls forward and backward movement.
  3. Use locking pliers or an adjustable wrench to rotate the shafts and slide the seat on its tracks.
  4. Turn clockwise to move rearward, counterclockwise to slide it forward.

Test the Seat Position

Once the seat is free to move, test the new position by rocking your weight backwards and forwards:

  • Make small adjustments until you find the ideal spot that supports your legs and back.
  • Check that you can comfortably reach the pedals and steering wheel.
  • Have someone watch as you enter and exit the vehicle, making sure you don’t hit your head.

Moving the Seat Manually While Installed

It is also possible to manually move a Ford F150 power seat without completely removing it:

Locate the Winder Handle

  1. Reach under the driver’s seat and feel around for a t-shaped plastic handle.
  2. This manual seat adjuster is attached to a cable winding drum.
  3. Grip the winding handle with your hand when found.

Turn the Handle to Move the Seat

  1. Rotate the handle clockwise to move the seat rearward on its tracks.
  2. Turn it counterclockwise to slide the seat forward.
  3. Spin the handle slowly to prevent jamming the mechanism.
  4. Keep winding in small increments until the seat reaches the desired position.

This method allows you to move the seat while it’s still installed in the truck. However, the full range of motion is limited compared to removing the seat completely.

Why Manually Moving Power Seats Can Be Difficult

There are a few reasons why adjusting a Ford F150 power seat manually can be challenging:

  • Tight spaces – Working in the cramped footwell makes accessing components difficult. Professional mechanics use lift equipment to raise the entire truck.
  • Heavy seat weight – The metal frames and powerful motors in power seats make them heavy. Getting enough leverage and strength to move the seat can be tough.
  • Jammed tracks – Debris or damage to the seat tracks can cause them to bind up. Forcing a jammed seat can damage the rails.
  • Complex wiring – Disconnecting electrical connectors incorrectly can disable seat controls permanently. Unplugging the wrong wires may also blow fuses.

For these reasons, having a professional mechanic repair your F150 power seat is recommended. However, with patience and care, manually moving the seat is possible in a pinch.

Professional Repair of Ford F150 Power Seats

Instead of attempting to move your power seat manually, consider taking your F150 to an auto repair shop. Ford dealership technicians and independent shops have the expertise to properly diagnose and fix power seat issues.

Benefits of professional power seat repair include:

  • Diagnosing underlying issues – Mechanics can determine what caused the failure, such as electrical shorts, gear damage, or disconnected cables.
  • Access to special tools – Proper repairs often require lifters, power drills, diagnostic software, and soldering guns.
  • Correct wiring methods – Experienced technicians know how to disconnect and reconnect sensitive seat wiring safely.
  • Preventing further damage – Forcing stuck seat components can damage tracks, motors, and gears. A mechanic can fix the root cause without making things worse.
  • Saving time and effort – Professional seat repairs are completed much faster than DIY approaches. No need to struggle for hours on your own.

While manually moving a Ford F150 power seat is possible for a temporary fix, having a certified automotive technician repair it properly is highly recommended. Investing in professional repair will get your power seats working again and prevent future issues.

Helpful Tips for a DIY Ford F150 Power Seat Repair

If you do decide to attempt manually adjusting your F150 power seat on your own, keep these tips in mind:

  • Work slowly and gently to avoid damaging plastic and metal parts. Don’t force anything that feels stuck.
  • Label and photograph wire connections before unplugging anything, so you can reconnect them correctly after.
  • Clean any debris, dirt, soda spills, etc from the seat rails before trying to move the seat.
  • Use penetrating oil or lubricant spray to help free up seized manual adjustment handles or gear teeth.
  • Have an assistant help lift the heavy seat in and out of the truck. Practice safe lifting form.
  • Check all electrical connections for damage, rust, or loose pins before reinstalling the seat.
  • Confirm the seat moves smoothly through its full range of motion before reattaching springs.
  • Refer to your F150 owner’s manual for specific power seat removal and installation instructions.

While a DIY approach takes time and effort, it can save money compared to paying a mechanic. Just be cautious, patient, and ready to call in a professional if the project becomes too difficult.


Manually moving a Ford F150 power seat requires some effort but can be done in a few different ways. The easiest method is to fully remove the seat from the truck. Alternatively, you can cut through the spring mesh or turn the control shafts with pliers to adjust the seat position without taking it out completely. Locating the manual winding handle also allows you to slide the seat forward or rearward if needed. However, due to tight spaces, heavy components, and complex wiring, having a professional mechanic repair your stuck power seat is strongly advised. With patience and care, you can manually adjust your F150’s seat, but avoid forcing anything to prevent damage. Consider all options to get your optimal driving position back safely.

About The Author

Scroll to Top