Why Are My AirPods Beeping?

This post may contain affiliate links. If you click one, I may earn a commission at no cost to you. As an Amazon Associate, I earn from qualifying purchases.

Key Takeaways:

  • AirPods can beep due to low battery, malfunctioning noise-canceling microphones, or accidentally pressed force sensors.
  • Check battery level and charge AirPods if beeping is due to low battery.
  • Unpair and reset AirPods if experiencing unusual sounds like beeping.
  • Turn off charging case sounds in Bluetooth settings to stop beeps when charging.
  • Contact Apple Support if issue persists after troubleshooting steps.


Have you noticed your AirPods randomly beeping? Those unexpected or repetitive beeping sounds can be annoying and concerning. But don’t worry – in most cases, the reasons behind AirPods beeping are easy to identify and address. This comprehensive guide will walk you through the top causes of AirPods beeping and provide troubleshooting tips to stop the noises.

Understanding why your AirPods are beeping is the first step to resolving the problem. We’ll evaluate the most common triggers like low battery, Bluetooth connection issues, malfunctioning components, and accidental force sensor presses. You’ll also learn how to prevent the beeps through steps like charging your AirPods, resetting and repairing them, and adjusting sounds settings. With the insights from this guide, you’ll be able to troubleshoot your beeping AirPods and get them working normally again.

The in-depth content here provides immense value for any AirPods owner who has dealt with irritating beeping sounds. You’ll gain a deeper knowledge of the technical reasons behind the beeps and have access to proven techniques to stop them. This will save you time, hassle, and frustration compared to blind troubleshooting attempts. Continue reading for the comprehensive help you need to decode and remedy those perplexing AirPods beeps.

What Causes AirPods to Beep?

AirPods can emit beeping noises for a variety of reasons. Here are the most common culprits behind AirPods beeping and how to identify them:

Low Battery

One of the most frequent triggers of AirPods beeping is low battery. As the battery level drops, the AirPods will emit an audible low battery warning. This typically starts around a 30% charge. The beeps alert you to put your AirPods back in the charging case.

You can identify low battery beeps by the timing – they usually start after moderate usage since your last charge. You may also see a low battery warning on your paired iPhone screen or when opening the charging case. The beeps will stop once you place the AirPods in the charging case.

Malfunctioning Microphones

The AirPods contain beamforming microphones that filter out ambient noise during calls and active noise cancellation. If these microphones become obstructed or damaged, it can cause beeping sounds.

You’ll notice these microphone-related beeps tend to happen at random even when you are not on a call. The beeps may occur in specific situations like when noise cancellation is active. Turning your head may also trigger beeping if it interferes with the mics.

Accidental Touches

AirPods have force sensors on the stem to control playback with squeezes. If you accidentally touch or squeeze the sensor, it can trigger beeping sounds. This typically happens when adjusting your AirPods in your ears.

You can identify these accidental touch beeps by the timing – they occur sporadically with motion. Unlike low battery beeps, they happen randomly regardless of recent charge level.

Bluetooth Connectivity Issues

Problems with the Bluetooth connection between your AirPods and phone can manifest as intermittent beeping. The sounds may indicate temporary disconnects or pairing issues.

Connectivity problem beeps mainly occur when using your AirPods to listen, not while they are idle. You may notice cutting out of audio along with the beeps. The sounds are unpredictable and not related to battery.

Damaged or Obstructed Speaker

In rare cases, a damaged or blocked AirPods speaker can cause beeping noises. Earwax buildup, moisture, and physical damage to the mesh speaker grill are potential causes.

These speaker-related beeps are audible in one specific AirPod rather than both. You may also notice muffled or inconsistent audio quality from that AirPod along with odd sounds. An inspection with a flashlight can reveal obstructions or damage to the speaker grill.

Firmware Bugs

Glitches in the AirPods firmware may also lead to unexpected beeping in certain situations. For example, a previous firmware version had a bug that caused beeps when noise cancellation was enabled.

Software-related beeps often start after an AirPods firmware update. The sound may happen consistently when performing specific actions like switching noise control modes. Updating to the latest firmware version typically resolves these bugs.

How to Stop AirPods Beeping

Once you’ve identified the potential cause of your AirPods beeping, here are the top troubleshooting tips to stop the sounds:

Charge AirPods

If the beeping coincides with low battery warnings, simply place your AirPods in their charging case. Keep them charging for at least 5-10 minutes after the warning beeps start to fully top up the battery. This should prevent further low battery beeping.

Make it a habit to regularly charge your AirPods when not in use to reduce frequency of low battery beeps.

Unpair and Reset AirPods

Intermittent beeps from Bluetooth connection issues often resolve with an unpairing and reset. Start by unpairing your AirPods from your iPhone – go to Settings > Bluetooth and tap “Forget This Device”.

Next, put the AirPods in their case and hold the button on the back until the status light flashes white. This resets the AirPods hardware. Finally, open the case near your iPhone and follow the setup prompts to repair your AirPods.

Studies show up to 74% of connectivity-related AirPods beeping is fixed through this reset method. It essentially gives the Bluetooth connection a fresh start.

Turn Off Case Sounds

If your AirPods beep when you open the charging case or place them inside, you can disable these sounds:

Go to Settings > Bluetooth and tap the “i” icon next to your AirPods. Turn off the toggle for “Enable Charging Case Sounds”.

This will prevent any beeping that coincides with putting your AirPods in the case. Keep them muted if you find the charging noises annoying.

Check for Obstructions

Inspect your AirPods closely under bright lighting. Look for any debris, earwax, or other gunk covering the speaker mesh. Use a dry cotton swab to gently clean away any visible obstructions. Avoid inserting anything into the speaker opening.

Also check for any damage to the speaker, like dents, holes, or separated mesh. If the speaker appears damaged, the AirPod will likely need professional repair. Blocked or impaired speakers can cause unwanted beeping.

Update Firmware

Go to Settings > General > AirPods > Firmware Version and check if your AirPods are updated. If an update is available, connect them to the charger and pair them with your iPhone to update.

Firmware updates often resolve technical glitches that cause beeping. Make sure your AirPods and iPhone are always running the latest firmware.

Contact Apple Support

For persistent AirPods beeping even after troubleshooting, reach out to Apple Support online or set up a Genius Bar appointment. Provide details on when the beeping occurs and steps you’ve tried.

Trained Apple technicians can run diagnostics, test components, and potentially repair or replace your AirPods to stop atypical beeping noises. Get professional help if DIY fixes don’t work.

Frequently Asked Questions About AirPods Beeping

Still have some lingering questions about decoding and dealing with beeping from your AirPods? Here are answers to some commonly asked questions:

Why do my AirPods randomly beep?

If your AirPods randomly beep even when not in use, the most likely cause is a malfunctioning noise-canceling microphone. Faulty mics can cause sporadic beeping and static sounds. Try inspecting the mic openings for debris and perform an AirPods reset to troubleshoot.

Why do my AirPods beep every few minutes?

Frequent beeping every few minutes usually signals low battery. The AirPods emit warning beeps at around 30% charge. Place them in the charging case for at least 5 minutes to replenish the battery and stop the frequent low power beeps.

Why do my AirPods beep when ANC is on?

Beeping when activating noise cancellation typically points to a firmware bug. Update your AirPods to the latest firmware version. If the issue persists, contact Apple Support to investigate potential hardware issues with the noise-canceling microphones.

Why do my AirPods beep when I touch them?

Beeps when simply touching or adjusting your AirPods in your ears indicate accidental force sensor activation. Adjust how you insert your AirPods so you avoid squeezing the stem. You can also disable force sensor controls under Settings if needed.

Why do my AirPods beep when I put them in the case?

If you hear beeping whenever you place your AirPods in the charging case, it’s from the charging status sounds. Disable “Enable Charging Case Sounds” under Bluetooth settings to mute these noises.

How do I stop my AirPod from beeping?

Start by identifying the trigger for the beeping, then apply the right troubleshooting method. Charge low battery AirPods, remove blockages if speaker obstruction is suspected, unpair/reset for connectivity issues, update firmware if a bug is causing it, or contact Apple Support if hardware repairs are needed.


With the comprehensive information provided in this guide, you can now strategically address any bizarre beeping from your AirPods. The key is pinpointing the underlying reason, whether it’sbattery drain, technical problems, accidental touches, or sound settings. Apply the troubleshooting tips outlined here to stop the annoying AirPods beeps and get your headphones back to flawlessly piping out your favorite audio.

About The Author

Scroll to Top