Why Is My Orbi Purple?

This post may contain affiliate links. If you click one, I may earn a commission at no cost to you. As an Amazon Associate, I earn from qualifying purchases.

Key Takeaways:

  • A purple light on an Orbi device indicates an issue connecting to the internet or syncing with the satellite.
  • The light could be coming from either the router or the satellite. Check to identify where the issue lies.
  • Potential solutions include checking connections, restarting, updating firmware, factory resets, and more.
  • Understanding the meaning behind the purple light is key to resolving connectivity problems.
  • With some troubleshooting and tweaking, you can likely get your Orbi working properly again.


If you’ve noticed a glowing purple light on your Orbi WiFi router or satellite, you may be wondering what it means and how to get rid of it. A purple light on Orbi devices is often an indicator of a connectivity issue that is preventing your Orbi from working properly. In this comprehensive guide, we will explore the potential causes behind the purple light on your Orbi and provide troubleshooting tips to help resolve the problem.

Specifically, we will look at the two main scenarios that can trigger the purple light – an inability to connect to the internet and a syncing problem between the router and satellite. We’ll examine why the purple light appears in these situations and walk through various solutions you can try to restore full functionality. With some focused troubleshooting and configuration adjustments, you can likely get your Orbi network back online and humming along smoothly again.

Understanding what the purple light signifies and knowing how to respond can save you the headache and frustration of an unusable WiFi network. This guide arms you with the knowledge to efficiently diagnose the issue plaguing your Orbi system based on the purple indicator and take steps to fix it. Whether the light is coming from the main router or the satellite, we’ve got you covered. Read on to become a purple light troubleshooting expert!

What Does the Purple Light on My Orbi Mean?

The purple light on your Orbi is trying to tell you something. But what exactly? Let’s break down the meaning behind the purple glow.

Router Unable to Connect to the Internet

If the purple light is coming from your Orbi router, it likely means the router is having issues connecting to the wider internet. Without this connection, your Orbi cannot provide WiFi access to your devices.

Some potential reasons for the connection failure include:

  • Problem with the broadband cable or ethernet cable connecting the router to the modem
  • Issues with the modem connecting to your Internet Service Provider (ISP)
  • Outage in your geographical area affecting your ISP connectivity
  • Firmware bug or misconfiguration in the router settings

The purple light indicates your router recognizes the problem and is essentially telling you “Hey, I can’t get online here!”

Satellite Unable to Sync to Router

Alternatively, if the purple light is emitted from your Orbi satellite device, it signifies your satellite is struggling to maintain its sync connection with the router.

The Orbi satellite must maintain constant communication with the router to relay the WiFi signal. When the satellite cannot sync properly, you may experience weak or unstable WiFi connection.

Some potential syncing issues stem from:

  • Satellite being out of range from the router
  • Obstacles physically blocking the signal path between router and satellite
  • Interference from other wireless devices in the same frequency band
  • Firmware bug or settings mismatch between router and satellite

So in this case, the purple light is the satellite saying “I’ve lost contact with the mothership!”

Bottom Line

  • Purple light on router = Something is blocking the router from accessing the internet
  • Purple light on satellite = Something is blocking the satellite from communicating with the router

Now that you know the significance behind the purple light, let’s look at ways to fix it!

Troubleshooting Steps When Your Orbi Router Light is Purple

If the purple light is coming from your Orbi router, follow these tips to try restoring the internet connection:

1. Check your cabling connections

Make sure the ethernet cable connecting your Orbi router to the modem is securely plugged in at both ends. Also verify the broadband cable providing the internet connection is properly connected to the modem.

Loose cabling is one of the most common reasons for internet connectivity issues. Simply re-seating cables can often fix purple light problems.

2. Restart your Orbi router

Rebooting the router flushes out any software glitches that could be preventing it from establishing the internet connection.

Unplug your Orbi router, wait 10-15 seconds, and plug it back in. Allow a few minutes for the reboot process to complete. In many cases, the purple light resolves after a simple restart.

3. Contact your ISP to check for network outages

Your internet service provider may be experiencing a temporary outage in your locality which is outside your router’s control. Check with your ISP to see if they are aware of any issues in your area.

If there is a known outage, you simply have to wait for connectivity to be restored by your provider’s engineers. The purple light will clear up once service returns.

4. Perform a power cycle

If a routine reboot doesn’t help, try a more comprehensive power cycle:

  1. Unplug the power cables from your Orbi router and modem.
  2. Wait 30 seconds, then plug them back in.
  3. Let the modem fully power on until no more blinking lights appear.
  4. Plug in the Orbi router power cable.

Cycling the power more completely reboots your network devices to clear any lingering glitches stalling the internet connectivity.

5. Check for firmware updates

Your Orbi router firmware needs to be up-to-date to maintain connectivity. Old firmware can trigger issues.

Log into your Orbi web interface and check if any firmware updates are available. If so, install them and reboot your device. Upgrading to the latest firmware often resolves purple light problems.

6. Factory reset the Orbi router

If all else fails, reset your Orbi router to factory default settings. This wiping of the configuration often fixes stubborn connectivity issues.

Press and hold the reset button on the back of the router for 10-15 seconds until the light blinks white. The router will reboot and restore factory conditions. Run through setup again to reconnect online.

With consistent troubleshooting using the tips above, you should be able to eliminate whatever barrier is preventing your Orbi router from accessing the internet, resolving the ominous purple light in the process!

Troubleshooting Steps When Your Orbi Satellite Light is Purple

If the purple glow is coming from your Orbi satellite, use these suggestions to try restoring the vital sync connection:

1. Check if the satellite is in range

The Orbi satellite needs to be within range of your router’s signals to maintain a sync connection. Make sure your satellite is located within 50 feet of the router with minimal obstructions between them.

If the satellite is too far away or on another floor, the distance itself could be breaking the sync. Relocate the satellite closer to re-establish a link.

2. Identify and remove sources of interference

Nearby devices emitting wireless signals can interfere with the Orbi sync process. Make sure the router and satellite are at least 3-6 feet from other wireless devices like baby monitors, cordless phones, microwaves, etc.

If possible, change the frequency band your other wireless devices use to create more breathing room for your Orbi network. Reducing interference can restore a robust sync connection.

3. Update your Orbi firmware

Just like with the router, outdated firmware on your Orbi satellite can prevent proper syncing. Log into the satellite through your Orbi app and check for any pending firmware updates.

Install the latest firmware version and reboot the satellite. Up-to-date firmware optimizes the sync functionality.

4. Reboot your Orbi devices

Given the interdependence between the router and satellite, reboot both units to give a fresh start to the sync process.

Unplug both devices, wait 30 seconds, and plug them back in. Allow time for full reboot before evaluating if the purple light cleared.

5. Factory reset the Orbi satellite

If rebooting does not work, reset the Orbi satellite to factory conditions to give syncing the best chance of success.

Press and hold the reset button on the satellite for 10-15 seconds until the light blinks white. Run through the setup process again to sync from scratch.

6. Switch the satellite’s sync connection band

As a last resort, try changing the wireless band your Orbi satellite uses to sync with the router:

  1. Access your router admin interface and navigate to the satellite sync settings.
  2. Switch the band from 5GHz to 2.4GHz or vice versa.
  3. Save settings and reboot both units.

Sometimes switching the sync frequency band can circumvent wireless obstacles to improve sync reliability.

With targeted troubleshooting using these tips, you should be able to overcome any sync barriers between your Orbi router and satellite to banish the purple light!

Frequently Asked Questions about Purple Lights on Orbi Devices

Here are some common questions about dealing with purple light issues on Orbi routers and satellites:

What causes the purple light on my Orbi router?

The purple light on your Orbi router usually means it is unable to connect to the internet. Potential causes include loose cabling, ISP network outages, old firmware, interference, or router hardware failures.

Why did my Orbi satellite suddenly show a purple light?

A purple light on your Orbi satellite typically indicates it lost its sync connection to the router. Possible reasons include the satellite being too far from the router, wireless interference, firmware mismatch, or satellite hardware issues.

How can I tell if the purple light is coming from the router or satellite?

Check the location of the purple light. It will illuminate on the front LED ring of either the router or satellite device. Determine which specific unit has the purple glow to narrow down the problem.

My Orbi router light turned purple after a firmware update – why?

Sometimes firmware updates can inadvertently disrupt the router’s internet connectivity and cause a purple light. Try rebooting and power cycling the router to re-establish the link. If the light persists, you may need to roll back or reinstall the firmware.

I relocated my Orbi satellite farther away and now it shows purple – what should I do?

If your satellite has a purple light after being moved, it is likely now out of range of the router’s sync signal. You’ll need to move the satellite closer to the router so it is within the 50 foot maximum range to re-establish sync.

How can I stop wireless interference from disturbing my Orbi satellite sync?

To reduce wireless interference, make sure your Orbi devices are sufficiently far away from other wireless devices. Also consider changing the frequency bands your other devices use to prevent signal overlap and clashes with your Orbi network.

In Summary

Having a purple light on your Orbi router or satellite can be concerning but is relatively straightforward to decipher and troubleshoot. A little focused investigation and targeted fixes using the tips in this guide should have you back up and running optimally again. Understanding the nuances of what the purple indicator means and how to respond properly will make the process smoother.

With the comprehensive information provided here, you now have a complete toolkit to efficiently diagnose and resolve any Orbi purple light issues you encounter. Leverage this knowledge to keep your home WiFi network humming with solid Orbi connections!

About The Author

Scroll to Top