How To Reset Ford F150 Tire Pressure Sensor?

This post may contain affiliate links. If you click one, I may earn a commission at no cost to you. As an Amazon Associate, I earn from qualifying purchases.

Key Takeaways:

  • The tire pressure monitoring system (TPMS) in Ford F150 trucks alerts drivers when tire pressure is low.
  • Resetting the TPMS after checking and adjusting tire pressure is important for proper monitoring.
  • Most Ford F150 models have a TPMS reset button that needs to be pressed in a specific sequence.
  • Newer Ford F150s may require a reset procedure using brake pedal and hazard light button.
  • After resetting, drive for about 20 minutes above 20 mph to allow sensors to calibrate.


Maintaining proper tire pressure is critical for safe driving and maximum fuel efficiency. However, over time tires naturally lose pressure from small punctures, temperature changes, and normal wear. The tire pressure monitoring system (TPMS) in Ford F150 trucks is designed to alert drivers when tire pressure drops 25% or more below the recommended level. This warning light indicates that one or more tires are under-inflated and need to be examined and refilled to the proper PSI.

Resetting the TPMS after checking and adjusting tire pressure is an important step to allow continued tire pressure monitoring. This comprehensive guide will walk through the methods for resetting the tire pressure sensor on Ford F150 trucks. With details on locating the reset button, use of the brake pedal and hazard light button, and drive time needed after resets, drivers will learn how to successfully recalibrate the TPMS. Having an understanding of the reset procedure can help F150 owners quickly address TPMS warning lights, ensure accurate monitoring, and maintain safe operation.

Proper tire inflation is key not only for safety but also for maximizing the life of tires and saving fuel. The information in this article will enable F150 drivers to take control when the TPMS light comes on and feel confident handling TPMS resets on their own. Read on to gain valuable knowledge about resetting Ford F150 tire pressure sensors.

How Does the TPMS in a Ford F150 Work?

The tire pressure monitoring system in Ford F150 trucks is designed to increase safety and efficiency by alerting drivers of decreased tire pressure. Here is an overview of how the TPMS functions:

  • Sensors installed in wheels – Each tire has a battery-powered sensor attached that monitors air pressure levels.
  • Wireless monitoring – Sensors transmit pressure data wirelessly to a receiver module in the vehicle.
  • Dashboard warning light – When pressure drops 25% below recommended PSI, the TPMS light illuminates to notify the driver.
  • Resetting after refilling – Once tire pressure is corrected, the sensors must be reset to begin monitoring current pressures.

The TPMS provides live, ongoing feedback about tire inflation levels. This allows issues to be addressed in a timely manner before serious safety hazards develop. Keeping the sensors properly calibrated and reset is crucial for accurate monitoring.

When Should the Tire Pressure Sensor be Reset on a Ford F150?

Here are the main situations when the Ford F150’s tire pressure sensors need to be reset for proper recalibration:

  • Low tire pressure – After refilling a tire that triggered the TPMS warning light, a reset is required. This allows the system to recalibrate based on the new pressure levels.
  • Tire rotation – Rotating tires to different positions requires a sensor reset so monitoring corresponds to the correct tires.
  • Tire replacement – When one or more tires are changed, a reset ensures the new tires are accurately monitored.
  • Sensor replacement – Whenever old or damaged tire pressure sensors are replaced, a reset establishes communication with the new components.
  • Reset malfunction – If a previous reset attempt failed or malfunctioned, repeating the process may get the system working properly again.
  • Before long trips – Resetting sensors prior to a long trip provides confidence that monitoring will be accurate throughout the journey.

Following any tire maintenance, rotation or replacement, and before extended drives, taking the time to complete a TPMS reset can prevent issues down the road.

Where is the TPMS Reset Button Located on a Ford F150?

The exact location of the tire pressure monitoring system reset button can vary depending on the Ford F150 model and year. Here are some of the common locations to check:

  • Steering wheel – Many models have the reset button near the bottom of the steering wheel, either in the center or off to the left side.
  • Instrument panel – It may be a button located among the other switches and controls in the panel to the right of the steering wheel.
  • Center console – In some trucks, the reset button is positioned on the center console near the gear shift.
  • Inside glovebox – Opening the glove compartment reveals the reset button in certain models.
  • Owner’s manual – For specific reset button locations, the owner’s manual is the most authoritative source.

Visually scanning around the driver seat area for a button marked “TPMS” is a good initial step. But consulting the owner’s manual or an authorized Ford dealer can definitively pinpoint the location.

How to Reset Tire Pressure Sensor on Most Ford F150 Models

For most Ford F150 trucks from model years 2004 through current, the TPMS can be reset using a simple button sequence. Here are the step-by-step instructions:

Locate the TPMS Reset Button

The reset button is usually a yellow button with the letters “TPMS” on it. Check around and beneath the steering wheel, on the center console, or inside the glove box. The owner’s manual precisely identifies the location.

Turn On Ignition Only

With your foot off the brake, turn the key or push the ignition button just to the first position where electrical accessories come on, but do not start the engine.

Press and Hold Reset Button

Push and hold the reset button until the tire pressure warning light in the instrument cluster blinks three times. This typically takes about 5-10 seconds.

Release Reset Button

Once the TPMS light has blinked three times, release the reset button.

Start Engine and Drive

Start the engine and drive the truck for about 20-30 minutes above 20 mph. This allows the sensors time to recalibrate to the current tire pressures.

The TPMS light should go off once the reset procedure is complete. The system will now monitor based on the new pressure readings.

Alternate TPMS Reset Method for Newer Ford F150s

Some newer Ford F150 models use a different reset sequence involving the brake pedal and hazard light button. Here are the steps:

Turn On Ignition Only

As before, turn the key or press the ignition button to the first position with accessories on, but do not start the engine.

Press and Hold Brake

With your foot, press and hold the brake pedal down about halfway.

Press and Hold Hazard Button

While still braking, press and hold the hazard light button until the TPMS warning light blinks twice.

Release Brake and Button

Once the TPMS light has blinked twice, release both the brake pedal and hazard light button.

Drive 20 Minutes

Start the engine and drive for around 20 minutes above 20 mph to complete the recalibration.

This reset method applies specifically to certain newer Ford F150 truck models. Checking the owner’s manual identifies exactly which procedure should be used.

How Long to Drive After Resetting TPMS?

Test drives after resetting the tire pressure monitoring system are a key part of the recalibration process. The duration needed is:

  • 20 minutes – Minimum drive time required for sensors to fully recalibrate to new pressure readings.
  • Above 20 mph – TPMS sensors only activate and register readings at speeds above 20 miles per hour.
  • Ideal: 20-30 minutes – Ensures ample time for sensors to update while driving normal road speeds.

Driving approximately 20-30 minutes above 20 mph following any TPMS reset gives the system time to fully recalibrate to current tire pressures. This completes the process for accurate monitoring.

Why is Proper TPMS Reset Important in a Ford F150?

Resetting the tire pressure monitoring system correctly after tire maintenance or rotation is critical for several important reasons:

  • Accurate pressure data – Resets sync the sensors to current pressures for reliable ongoing readings.
  • Avoid false alarms – Prevents false low-pressure warnings based on old tire positions.
  • Maximize tire life – TPMS aids proper inflation to reduce uneven tread wear.
  • Enhanced safety – Eliminates missed warnings due to inaccurate monitoring.
  • Improved fuel economy – Proper inflation enabled by TPMS can boost MPG performance.
  • Valid sensor calibration – Confirms all sensors are communicating and operating properly.

Taking a few minutes to correctly reset the tire pressure monitoring system when required keeps this vital safety and efficiency feature functioning optimally.

Troubleshooting Ford F150 TPMS Reset Issues

In some cases, the TPMS may fail to reset correctly or continue showing a malfunction. Here are some troubleshooting tips:

  • Try the reset procedure again in case it was incomplete or faulty the first time.
  • Verify tires are inflated to the recommended pressures and the valves are tight.
  • Check for faulty or dead sensors by having a mechanic activate each one with a special tool. Replace non-working sensors.
  • Damaged sensor batteries may need to be replaced after 5-7 years of use.
  • Use an automotive-grade TPMS scan tool to reset and diagnose the system.
  • Interference from aftermarket wheels, lifts, and accessories can disrupt sensor signals.

Consulting the owner’s manual or a qualified Ford service technician can also help resolve stubborn TPMS reset issues. Replacing any damaged or expired components is key to restoring normal operation.

Frequently Asked Questions about Resetting Ford F150 TPMS

Here are answers to some common questions about resetting the tire pressure monitoring system on Ford F150 trucks:

How do I know if I have a TPMS malfunction?

The warning light will flash for about 75 seconds after startup and then remain illuminated indicating a system malfunction. A faulty sensor or receiver is likely preventing normal operation.

Do I need a special tool to reset the sensor?

No, the built-in reset button located in the driver area lets you manually reset the system. Some professional TPMS tools can also program sensors.

Can TPMS be reset without driving the vehicle?

Driving for about 20 minutes after the reset is required to fully recalibrate the system. Stationary resets may not complete calibration.

Will TPMS reset wipe out sensor IDs and settings?

No, the programmed sensor IDs will remain intact through reset procedures. Only pressure readings are cleared and updated.

How often should I reset the tire pressure sensors?

Reset any time tires are rotated, changed or refilled and about once a year as part of routine maintenance. More frequent resets are not necessary.

Resetting Ford F150 TPMS

  • Locate the reset button near the steering wheel and understand the specific reset sequence for your F150 model year.
  • Drive at highway speeds for 20+ minutes following any reset to allow full sensor recalibration.
  • Perform the reset procedure after tire pressure adjustments, rotations, or replacements.
  • Annual TPMS resets help confirm sensors are functioning and calibrated.
  • Consult Ford manuals and experts if sensor issues persist after attempted resets.

Maintaining proper tire pressures is the best way to maximize safety, handling, and fuel mileage for your Ford F150. Learning the ins and outs of the truck’s tire pressure monitoring system can help keep this critical component working optimally.

About The Author

Scroll to Top